30
GB
www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
•
Store the battery and the device separately from
each other.
•
Charge the battery before storing it for the winter.
•
In case of longer breaks between use, always
drain the chain lubricating oil from the device.
• Place the protective sheath on the cutting unit.
• Keep the device, and its plastic components in par-
ticular, away from brake fluid, petrol, products con
-
taining oil, penetrating oil etc. They contain chemi
-
cal substances that may damage or destroy the
plastic parts of the device.
• Fertilisers and other garden chemicals contain
substances which can have a heavily corrosive
effect on metal parts. Do not store the device close
to these substances.
11. Disposal and recycling
T
he equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip
-
ment and its accessories are made of various types of
material, such as metal and plastic. Defective compo-
nents must be disposed of as special waste. Ask your
dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author
-
ised collecting point for the recycling of waste elec
-
trical and electronic equipment. Improper handling
of waste equipment may have negative consequenc
-
es for the environment and human health due to po-
tentially hazardous substances that are often con
-
tained in electrical and electronic equipment. By
properly disposing of this product, you are also con
-
tributing to the effective use of natural resources.
You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
Batteries and rechargeable batteries do not be-
long in the household waste!
As the consumer you are required by law to
bring all batteries and rechargeable batteries,
regardless whether they contain harmful sub
-
stances* or not, to a collection point run by the local
authority or to a retailer, so that they can be disposed
of in an environmentally friendly manner.
*labelled with: Cd = cadmium, Hg = mercury, Pb =
lead
• Remove the batteries from the laser before dispos-
ing of the machine and the batteries.
Cleaning
m
WARNING!
Do not use water or liquid cleaning products.
m
CAUTION!
Clean the device after every use.
An unclean device will lead to material damage and
malfunctions.
• Use a damp cloth and a soft brush to clean the de-
vice.
•
Take off the chain cover and then remove deposits
on the guide rail, saw chain, chain wheel and chain
cover with a soft brush.
• Keep the ventilation slots clean and free of dust.
Maintenance
Re-tightening the saw chain
The saw chain must not sag, although it should be pos-
sible to pull it 1-2 millimetres away from the guide bar in
the centre of the guide bar.
•
Turn the handwheel anticlockwise, sufficiently that
the guide bar can be moved by hand.
• Turn the chain tensioning wheel anticlockwise, so
that the chain is tensioned.
•
Turn the saw chain by hand, to check it runs freely. It
must glide freely in the rail.
• Tighten the handwheel for fastening the rail and
chain cover.
NOTE
The tension of a new chain must be checked after a
few minutes in operation, and adjusted if necessary.
To do so switch the device off, remove the battery and
apply the chain brake.
Cleaning the guide bar oil guide groove
• Dismantle the guide bar.
•
Clean the oil guide groove of dirt with a suitable tool.
Use a plastic spatula, do not use steel tools!
•
Refit the guide bar.
Sharpening the saw chain
Special tools are required to sharpen the saw chain;
these ensure that the chain cutting edges are sharp-
ened at the correct angle and to the correct depth.
We recommend having the saw chain sharpened by
a specialist.
Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the follow
-
ing parts are therefore also required for use as con-
sumables.
Wear parts*: Saw chain, guide rail, chain oil, carbon
brushes, claw stop, chain trap, chain oil filter
* Not necessarily included in the scope of delivery!
10. Storage
•
Store the device in a dry and frost-free (10-25 °C)
place.
