www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
www.scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58
GB І 13
Device description (Fig. 1)
1
Drilling/hammer-drilling selector switch
2
Gear selector switch
3
Depth stop
4
Depth stop release
5
Quick-release chuck
5a
Front sleeve
5b
Rear sleeve
6
Additional handle lock
7
Additional handle
8
Rotational direction switch
9
Speed adjustment dial
10
On/off switch
11
Handle
12
Locking knob for continuous running
Unpacking
•
Open the packaging and remove the device care
-
fully.
•
Remove the packaging material as well as the
packaging and transport bracing (if available).
•
Check that the delivery is complete.
•
Check the device and accessory parts for trans
-
port damage.
•
If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas
-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
Intended use
The device is intended:
•
for impact drilling in concrete, masonry or rocks,
•
for drilling in wood, metal or plastic,
•
for screwing in and loosening screws.
Any other use that is not explicitly approved in these
instructions may result in damage to the equipment
and represent a serious danger to the user.
For security reasons, the device is not intended
for children and young people under the age of 16.
Young people aged 16 and over may only use the
device under adult supervision. The device is not
designed for commercial use.
The manufacturer cannot be held liable for damage
when the appliance is not used in conformity with
its intended purpose or due to incorrect operation.
General Power Tool Safety Warnings
m
WARNING!
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref
-
erence.
The term „power tool“ in the warnings refers to your
mains-operated (corded) power tool or battery oper
-
ated (cordless) power tool.
Introduction
MANUFACTURER:
scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
•
Improper handling,
•
Non-compliance of the operating instructions,
•
Repairs by third parties, not by authorized service
technicians,
•
Installation and replacement of non-original spare
parts,
•
Application other than specified,
•
A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu
-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
WE RECOMMEND:
Read through the complete text in the operating in
-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord
-
ance with the recommendations.
The operating instructions contain important infor
-
mation on how to operate the machine safely, pro
-
fessionally and economically, how to avoid danger,
costly repairs, reduce downtimes and how to in
-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula
-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed con
-
cerning the operation of the machine and who are in
-
formed about the associated dangers. The minimum
age requirement must be complied with.
In addition to the safety requirements in these oper
-
ating instructions and your country’s applicable regu
-
lations, you should observe the generally recognized
technical rules concerning the operation of wood
-
working machines.
GB
Caution - Read the operating instructions to reduce the risk of inquiry
GB
Wear safety goggles!
GB
Wear a breathing mask!
m
GB
Warning! Danger to life, risk of injury or damage to the tool are possible
by ignoring!.
GB
Protection class II
GB
Wear ear-muffs!