www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB
| 33
•
Never set up or operate the equipment in the vicinity
of a fire place, open lights or sparking machines.
•
Do not store or eat food and drink in the work area.
Paint vapours are harmful to your health.
•
The work area must exceed 30 m³ and suffi cient
ventilation must be ensured during spraying and
drying.
•
Do not spray against the wind. Always adhere to
the regulations of the local police authority when
spraying combustible or hazardous materials.
•
Do not process media such as white spirit, butyl
alcohol and methylene chloride with the PVC
pressure hose. These media will destroy the
pressure hose.
•
The work area must be separated from the
compressor so that it cannot come into direct
contact with the working medium.
Operating pressure vessels
•
You must keep your pressure vessel in good work-
ing order, operate the vessel correctly, monitor the
vessel, carry out necessary maintenance and re-
pair work immediately and meet the relevant safety
precautions.
•
The supervisory authority may enforce essential
control measures in individual cases.
•
A pressure vessel is not allowed to be used if it has
faults or deficiencies that can endanger workers or
third parties.
•
Check the pressure vessel for signs of rust and
damage each time before using. Do not use the
compressor with a damaged or rusty pressure ves-
sel. If you discover any damage, then please con-
tact the customer service workshop.
Do not lose these safety instructions
6. Technical data
Mains connection
230 V ~ 50 Hz
Motor rating W
2200
Operating mode
S1
Compressor speed
2850 min
-1
Pressure vessel capacity
(in liters)
50
Operating pressure
approx. 10 bar
Theoretical intake capacity (l/min)
approx. 412
Effective delivery quantity
approx
. 294 l/
min
Sound power level L
WA
93 dB(A)
Sound pressure level L
pA
71 dB(A)
Uncertainty K
WA
2.03 dB
Protection type
IP20
Weight of the unit in kg
approx. 41
Oil (15W 40) l
approx. 0,25
Max. altitude
(above mean sea level)
1000 m
The noise emission values were measured in accord-
ance with EN ISO 3744.
Wear hearing protection.
The effects of noise can cause a loss of hearing.
m
Avviso:
Il rumore può avere un grave impatto sulla
salute. Se il rumore della macchina è superiore a 85
dB (A), usare degli otoprotettori adeguati.
7. Before starting the equipment
•
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
•
Prior to initial commissioning, remove the transport
plug and fill the crank housing with oil as described
in item 8.4.
•
Check the equipment for damage which may have
occurred in transit. Report any damage immedi-
ately to the transport company which was used to
deliver the compressor.
• Install the compressor near the point of consump
-
tion.
•
Avoid long air lines and supply lines (extension ca-
bles).
•
Make sure that the intake air is dry and dustfree.
•
Do not install the compressor in a damp or wet
room.
•
The compressor may only be used in suitable
rooms (with good ventilation and an ambient tem-
perature from +5 °C to 40 °C). There must be no
dust, acids, vapors, explosive gases or inflamma-
ble gases in the room.
•
The compressor is designed to be used in dry
rooms. It is prohibited to use the compressor in ar
-
eas where work is conducted with sprayed water.
• The oil level in the compressor pump has to be
checked before putting the equipment into opera-
tion.
•
The compressor may only be used outdoor briefly
when the ambient conditions are dry.
•
The compressor must always be kept dry and must
not be left outdoors after work is complete.
