www.scheppach.com /
+800 4002 4002
62 | GB
AC motor
• The mains voltage must be 230 V~
• Extension cables up to 25 m long must have a cross-section of 1.5
mm
2
.
Connections and repairs of electrical equipment may only be carried out
by an electrician.
Please provide the following information in the event of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Machine data - type plate
11. Cleaning and maintenance
Pull the mains plug before any adjustments, maintenance or re-
pair.
m
Have any work on the device that is not described in this in-
struction guide performed by a professional. Only use original
parts. Allow the device to cool off before any maintenance or
cleaning is undertaken. There is a risk of burning!
Always check the device before using it for obvious defects such as
loose, worn or damaged parts, correct the positioning of screws or oth-
er parts. Exchange the damaged parts.
Cleaning
Do not use any cleaning agents or solvents. Chemical substances
could damage the plastic parts of the device. Never clean the device
under running water.
• Clean the device thoroughly after each use.
• Clean the ventilation holes and the surface of the device with a soft
brush or cloth.
• Remove the swarf, dust and dirt with a vacuum cleaner if necessary.
