www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
24 GB
Attention: risk of accident!
The wood must always be seated on both sides of the saw blade on the v-block of the rocker. (see arrows)
Caution Danger of accidents!
Wear safety shoes.
Caution Danger of accidents!
To wear ear protection.
Wear safety glasses.
Accident risk!
Before commissioning instruction
manual read.
Attention!
Tool continues to run after
power disconnected!
Before any maintenance, cleaning
or repair work, disconnect the unit
from the power supply!
During Cardan shaft operation,
park the tractor and remove the
ignition key!
5. Training of the operator
• Forward the safety instructions to all people working on or with this machine.
• The minimum age for the operating person is 18 years. Trainees should be minimum 16 years of age, but are only
allowed to work with the machine under supervision.
• People running the machine should not be distracted.
• Keep children away from the to the net connected machine.
•
Wear tight fitting clothes. Take off jewelry, rings and wristwatches.
• Observe all safety and hazard warnings on the machine and keep it in readable condition.
•
Be careful at work: Danger of damaging finger(s) and hand(s) by the rotating cutting tool.
• Regular pauses must be observed during operation.
• Safety shoes and protective clothing must be worn during operation.
6. Technical Data
kw 7.0
kwz 7.0
kw-ze 7.0
Article Number
1905115902
1905115903
1905115904
1905115905
Construction measurements:
Total length
mm
1060
1410
1500
Total width
mm
820
900
900
Total height
mm
1150
Rocker support
mm
735
Saw blade ø
mm
700
Idle speed motor
1/min
1380
1400
-
1380
Cutting speed saw blade
m/sec
51
51
51
51
Weight
kg
152
156
171
217
Power unit
Motor
V/Hz
380 - 420 / 50
380 - 420 / 50
Cardan shaft
380 - 420 / 50
Cardan shaft
Input power P1
kW
5,2
7,5
-
5,2
