Disassembly
Removing the System Memory (RAM) 2 - 13
2.Disassembly
Removing the System Memory (RAM)
The computer has three memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) DDR3L
supporting 1600 MHz. The main memory can be expanded up to 32GB. The total memory size is automatically detected
by the POST routine once you turn on your computer.
Primary System Memory Upgrade Process
1.
Turn off the computer, and turn it over to remove the battery (
page 2 - 5
).
2.
Remove screws
-
and slide the component bay cover until the cover and case indicators
are aligned.
3.
Remove the component bay cover
.
4.
The RAM module will be visible at point
on the mainboard (
Figure 9c
).
Figure 9
RAM-1 Module
Removal
a. Remove screws and
slide the component bay
cover as indicated.
b. Remove the component
bay cover.
c. Locate the module.
6. Component Bay
Cover
•
4 Screws
Contact Warning
Be careful not to touch
the metal pins on the
module’s connecting
edge. Even the clean-
est hands have oils
which can attract parti-
cles, and degrade the
module’s performance.
1
4
5
6
7
a.
b.
6
1
2
3
4
7
4
5
5
5
5
c.
Summary of Contents for W723
Page 1: ......
