23
6. Most frequent operations summary table.
Fresh water production without automatic washing:
1.
Seacock and waste water drain valves open.
2.
Depressurization and reset valves closed.
3.
AUT WASHING switch in “off” position.
4.
Select PUMP 1 .
5.
Push START button to start the production.
6.
Push STOP button to turn the watermaker off.
Fresh water production with automatic washing at the end of cycle:
1.
Seacock and waste water drain valves open.
2.
Pressure water system turned on.
3.
Depressurization and reset valves closed.
4.
AUT WASHING switch in “on” position.
5.
Select PUMP 1 .
6.
Push START button to start the production.
7.
Push STOP button to turn the watermaker off.
Reset procedure:
(If the watermaker blocks during the re-start)
1.
Turn the system off.
2.
Open the reset valve (lever in horizontal position).
3.
Screw the positioner knob clockwise until it can be moved no further.
10 turns at least are necessary.
4.
Unscrew the positioner knob up to the original position, until when it is blocked back.
5.
Close the reset valve (lever in vertical position).
6.
Restart the system
7. WARRANTY
The equipment and the relevant accessories are guaranteed 12 months from delivery. The
guarantee does not include consumable items (filters, carbon filters, membranes, etc.). The
“ERS” pressure amplification device is guaranteed 36 months, provided that the annual
maintenance is performed at a Schenker service point.
The guarantee covers faults, defect of materials and parts. It is limited to the replacement or
repair of faulty parts. The expense for the disconnecting and reinstalling on the vessel and
transport of the equipment from or to our Service Point, or our factory will be at the customers
own expense.
The under guarantee delivered parts transport, will be at customer’s own risk.
In case of repairs under guarantee performed by our technicians on the customer vessel, the
faulty parts replacement cost will be at Schenker's expense, while manpower and travel expenses
will be charged to the customer. The guarantee does not include faults caused by negligence in
operating, maintenance and installation of the device (if not carried out by an authorised
Schenker Service point).
Dismantling by non-authorized personnel will render void all guarantees. Schenker Italia can not
be held liable for any direct or indirect damage caused by the malfunctioning equipment, limiting
its responsibility to the repair and replacement of faulty parts.
