Domotique embarquée
Embedded home automation
P.3
Domotique embarquée
Embedded home automation
The power bloc can control up to 6 functions
With this box, it's possible to :
- Centralize power commands of 6 electrical functions.
- Provide electrical protection for each output.
- View the status of each system through status LED.
- Physically troubleshoot each order in the event of an electronic failure.
- Receive data from 6 IBS sensors (Intelligent Battery Sensor).
- Integrate into a MULTIBLOC compatible network, and therefore be controlled by equipment of the type:
• NAVICOLOR display.
• WIFI server.
• Multiplexed switch module.
A forced operation of each output is possible using a bypass fuse (2 fuses are supplied : 15A et 25A).
The 6 power outputs are adjustable from 3 to 25A and can control 12/24 DC networks like:
- interior lights,
- navigation instruments,
- navigation lights,
- the pumps,
- comfort devices,
- etc, ...
Several modules (Bloc 9 can be installed side by side depending on the number of functions to be controlled.
Integration in a Multibloc Network
One or more Blocs 9 can be integrated in a MULTIBLOC network. A NAVICOLOR display can then be used to:
- Configure the Bloc 9 outputs
- Control the outputs
- Read the output status
- Read the IBS measurements of battery status.
This network is provided through the CAN bus.
The various Blocs 9 in the network are differentiated via the MICROSWITCH which can be used to allocate anumber in the network.
Additional function of Bloc 9 when integrated into a Multibloc network:
Fuel transfer
Associated with a Bloc 7 and a Navicolor, Bloc 9 allows operation of pumps to make fuel transfers form one tank to another one directly
from the touch screen.
Equipment description
LED Status
One LED per function indicates the status of the system:
- LED off: the circuit is inactive.
- LED on: the circuit is active.
Troubleshooting
The Bloc 9 has 6 fuse holders (for Mini Blade Fuse) to install the bypass for each circuit.
This solution allows each output to be overridden if there is a major failure of
the electronic system.
Electrical protection
The Bloc 9 provides electrical protection for your systems:
- Rating adjustable from 3 to 25 A according to your needs
- Reverse polarity protection (+/- battery inversion)
- Current surge protection.
Management of IBS sensors
The bloc 9 can manage up to 6 IBS which can
transmit the following battery information:
- Voltage
- Incoming and outgoing current
- Charge and discharge current
- Battery temperature
- Residual capacity
- Ageing.
The IBS are connected to the bloc 9 through the LIN
bus. Measurements are read and alerts configured
through a NAVICOLOR display.