TROUBLESHOOTING
Power
supply
can
not
be
turned
on
* Make
sure that the
power
cord
is fully
inserted
in
the
mains
outlet.
The
remote
control does
not
work
* No
power
in
batteries.
Replace
the
batteries.
* Remote
controller
not
aim
at the
infrared
sensor
of
the
unit.
No
sound
* Make
sure
that the
audio
cable
is
connected
correctly
and
securely
to
the
back
of
your
unit and to the
sound
system.
* Make
sure that the
sound
system
is
set
to the
correct audio
input.
* Turn
your
unit
off, then
back
on.
* Volume
is
set to
minimum. Increase
volume
to
a
higher
level.
* Unit
is
mute
mode. Press
MUTE
key
to
restore
sound.
N
* Make sure you choose the right Video output mode on the TV
* Make sure the right video cable is connected to the right outputs. Please refer to detailed installation drawing
on
this
manual
on
page
8.
* Turn your unit off, then back on.
Remarks
for
playing
videos in iPhone
and iPod
modes:
If
you
cannot
watch
on
your
TV
a
video
stored
on
your
iPod
or
iPhone, please
check
out
the
following
points:
*
Some
generations
of
iPod
or
iPhone
are
not
fully
compatible
with
the
Pr,
Y,
Pb
Component
Video
output
mode.
For
some
products,
you
may
experience
distorted
colours
(red
colours) or
no
image
at
all.
This
is
a
problem
of
your
product.
If
this
situation
arises,
simply
set
the
Video
mode as Composite
as
described
above. Composite
Video mode
is
indeed
compatible
with
all
existing
generations
of iPod
and
iPhone
products.
* Switching
from
Pr,
Y,
Pb
Component
Video
output
mode
to
Composite
Video
mode
or
vice-versa,
please
press
the
key
SAVE/VIDEO
once.
* If
you
still
experience
a
problem for
watching
video,
please
go
t iTunes
web
site
to
upload
your
iPod/iPhone
device
with
the
latest
firmware.
* Additionally
you
may
switch
your iPhone
into
Airplane
mode
so
as to
avoid
interference
on
your
TV
screen.
*
Please
note
the
unit
can
decode
videos
from
your
iPod
and
iPhone
device
only.
It
cannot
decode
photos
from
the
or
iPhone
device.
* Videos
or
photos
cannot
be
decoded
a
USB
or
Memory
Card
device.
USB
and
memory
slot can
solely
playback
MP3-format
music.
The
unit
does
not work
at
all
* The
unit freezed
due
lightning
strike, static
or
other
interference.
* Turn
your
unit
off, then
back
on
again.
iPod
not
Video
* Only one Audio-Input can be activated at the same time. Therefore, based on your home configuration,
please choose to connect either AUDIO 1 or AUDIO 2 only, but not both.
o
from
-14-
No Video output or distorted image, or wrong set of colours on screen