51
1.
Disconnect the appliance from the
mains (fuse-box).
2.
Take away the contamination.
3.
Wipe the sensors with a damp
sponge or cloth.
4.
Dry the sensors with kitchen paper.
5.
Connect the appliance to the mains
again.
The
appliance
may
beep
and
automatically turn off. The sensors may
not work properly when they are wet.
Dry the control panel carefully before
you put it into operation again.
Do not use any abrasive detergents! Do not use any organic detergents!
2
Do not use essential oils!
Replacing of the power cord
DANGER!
The power cord must be replaced by a qualified and
authorized professional only.
9. TROUBLE SHOOTING
ERROR
CAUSES
MEASURES
The appliance cannot be switched on.
Break in the power supply.
Check that the appliance is
connected to the mains. Check the
household fuse box. Is there a power
failure at your place of residence?
The sensors do not respond.
The sensors are locked.
Unlock the sensors.
The sensors are difficult to operate.
Liquid on the sensors.
You used your fingertip.
Dry the sensors.
Use the bottom of your top phalanx.
The glass ceramic is scratched.
You used unsuitable cookware with
sharp edges.
You used an unsuitable detergent,
e.g. an abrasive.
Use suitable cookware.
Use suitable detergents.
Some cookware make cracking or clicking noise.
Your cookware is produced with
layers made of different kinds of
metal.
This is normal for such a cookware
and does not indicate a malfunction.
2
Detergents such as vinegar, citric acid etc.
