42
2.
Place a cookware on the desired cooking zone.
Always keep the bottom of the cookware as well as
the cooking zone clean and dry.
3.
Select the power level by touching a
SELECTION OF
COOKING ZONE
sensor. The indicator flashes.
4. Set the power level with the
SLIDER CONTROL
.
a.
When you do not set a power level within 1 minute,
the appliance will switch off automatically. You have to
start at step 1 again.
b.
You can change the power level whenever you want
while cooking..
The display indicates ↔ indicator of the power level alternately.
You have not placed the cookware on the correct zone, or
you use unsuitable cookware, or
You use cookware which is too small or the cookware is not centred properly
on the cooking zone.
While using unsuitable cookware, the cooking zone does not heat up. The
display goes off automatically after 1 minute even if you have not placed
suitable cookware on the cooking zone.
When you have finished cooking
1.
Touch the
SELECTION OF COOKING ZONE
-sensor of the
cooking zone you want to switch off.
2.
Switch off the relevant cooking zone by setting the
SLIDER CONTROL
to 0. Check that the indicator displays
0
3.
Switch off the appliance with the O
N
/O
FF
-sensor.
