Schaub Lorenz 26LT481CT, Instruction Manual

Page: 68 / 93

English - 67 -
Unicable: If you have multiple receivers and a
unicable system, select this antenna type. Press OK to
continue. Con
 gure settings by following instructions
on the screen. Press OK to scan for services.
DiSEqC switch : If you have multiple satellite dishes
and a DiSEqC switch , select this antenna type. After
selecting DiSEqC switch , another menu screen will
be displayed. You can set four DiSEqC options (if
available). Press GREEN button to scan all satellites
or press YELLOW button to scan only the highlighted
satellite. To save and exit press OK button.
When there is a short circuit in LNB, “Tuner
Overload” message is displayed on the screen, in that
case, please remove your satellite cable immediately
from your TV set.
Auto Tuning
HINT: Auto tuning feature will help you to retune the TV
set in order to store new services or stations.
Press “ MENU ” button on the remote control and
select Installation by using “ ” or “ ” button. Press
OK button and the following menu screen will be
displayed.
Select Automatic Channel Scan (Retune) by using “
”/“ ” button and press
OK button. Automatic Channel
Scan (Retune) options will be displayed. You can
select options by using
“ ”/“ ” and OK buttons.
Auto Channel Scan Menu Operation
Digital Aerial: Searches and stores aerial DVB
stations.
Digital Cable: Searches and stores cable DVB
stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores both
analogue and aerial DVB stations.
Digital Cable & Analogue: Searches and stores both
analogue and cable DVB stations.
Satellite: Searches and stores satellite channels.
Whenever you select an automatic search type and •
press OK button, a con  rmation screen will appear
on the screen. To start installation process, select
Yes , to cancel select No by using .“ ” or “ ” and
OK button.
After auto channel scan type is set and selected •
and con  rmed, installation process will start and
progress bar will move along. Press “ MENU ” button
to cancel process. In such a case, located channels
are not stored.