Bracket
install
ation
when wir
ing is
inside
the wall:
1.
Open the package and take
out the accessories for
installation.
2. Drill 2 holes with a 6 mm diameter
and 35 mm deep according to the
spacing of the lamp bracket
holes
.
(Use screw anchors when needed)
3
.
Fix the bracket on the wall with the
Φ3,8*30 mm screws.
4. Remove the hol
ding
-ring.
5. Remove the lamp cover.
6
. Attach the lamp to the bracket.
8. Replace the lamp cover and
reattach
it to the base with the Φ2.3*8 mm
screws.
9. Replace the holding ring. The
installation is now complete!
7
. Connect the desired power
supply
(12-24
V
AC
/DC
or
85-2
65
V AC
).
8
