Schaller FL2, Operating Manual, Page: 33 / 48

Page 33
Exporting moisture readings from the humimeter FL2
Connect the humimeter FL2 to your computer using the
supplied USB cable:
1. Insert the USB Mini B connector into the humi
meter FL2 (figure 61 ).
2. Insert the USB connector into the computer.
3. Open LogMemorizer on your computer.
4. Switch on the humimeter FL2.
5. Press twice or hold for 2 seconds.
6. Select Send Logs (figure 62 ). To do so, press or
and confirm by pressing .
7. Select Manual Logs (figure 63 ). To do so, press
or and confirm by pressing .
»
The display will then show the message Send
(figure 64 ).
»
All measuring values saved on the humimeter FL2
will now be sent to your computer.
Initiating the data export at your computer
Connect the humimeter FL2 to your computer using the supplied USB cable:
1. Insert the USB Mini B connector into the humime-
ter FL2 (figure 65 ).
2. Insert the USB connector into the computer.
3. Open LogMemorizer on your computer.
4. Switch on the humimeter FL2.
5. Open the Communication tab in LogMemorizer (figure 66 ).
61
62
63
64
65
66