Schaller FL2, Operating Manual, Page: 19 / 48

Page 19
»
Continue to compact as long as the display shows
a constant measuring value (figure
21 ).
»
The displayed value flashes when the moisture
content exceeds the measuring range of the
selected product type (figure
17 ). A flashing value
signals lowered accuracy of the measurement. The
measuring range is dependent on the product type
(see
"6. Product types" ).
» Once the reading has been taken, it can be saved
on the device (see
"5.5 Saving individual readings"
or "5.6 Saving several readings (a measurement
series) at the same time" ).
CAUTION
Risk of injury
Risk of injury due to the measuring head
►
Keep the measuring head away from your body throughout all activities.
►
Keep the measuring head away from other people throughout all activities.
ATTENTION - HIGH MEASURING INTERVAL
The measuring head will heat up when taking a high amount of measurements
on bales with high compressed density, in a rapid succession. This will decrease
the accuracy of the measurement significantly.
i
Information - Measuring accuracy
This rapid and non-destructive measuring procedure allows you to take
moisture readings at a number of different points. When saving the individual
readings, the device will automatically calculate the readings’ average (see
"5.6
Saving several readings (a measurement series) at the same time" ).
i
Information - Incorrect readings
Always make sure to select the correct product type for the material you are
measuring. This prevents taking incorrect readings (see
"11. Faults" ).
20
21