Page | 28
6.5
Viewing individual readings from a series of measurements
To do so:
You must have saved a series of measurements
31
(e.g.
2 logs
). The display will now appear as shown in
figure
31
.
1.
Press
.
2.
Navigate to the required measurement series. To
32
do so, press
or
.
»
The display will now appear as shown in figure
32
.
3.
Press
to switch to another input level.
33
»
The display will now appear as shown in figure
33
.
4.
Press
again.
»
The display will now appear as shown in figure
34
.
34
5.
Navigate to the required reading (
No.: 1, No.: 2, No.:
3
). To do so, press
.
6.
Press
to leave this screen.
6.6
Deleting all measured values (data log)
To do so:
You must have taken and saved one or several
35
readings.
1.
Press
twice or hold for 2 seconds.
2.
Select
Edit Logs
(figure
35
). To do so, press
or
and confirm by pressing
.
36
3.
Select
Clear Logs
(figure
36
). To do so, press
or
and confirm by pressing
.
4.
The display will then show the message
clear?
37
(figure
37
).
5.
Confirm by pressing
.
»
The data log has been deleted.