Page | 20
ATTENTION
Pollution of the sensor with material
If the screw-top jar is filled too high, the sensor can become polluted, which
leads to incorrect measurements.
► Make sure that the metal protective grid does not come into contact with
the material being measured.
ATTENTION
Pollution of or damage to the sensor
By tilting or turning over the filled water activity measuring chamber, the sensor
can become polluted or damaged, which leads to incorrect measurements.
► Make sure to only lift the water activity mearuing chamber straight up into
the air.
i
Information - Measuring accuracy
This rapid and non-destructive measuring procedure allows you to take multi-
ple moisture readings of the same sample material. When saving the individual
readings, the device will automatically calculate the read
ings’ average (see
"6.2.2 Saving several readings (a measurement series) at the same time"
).
i
Information - Incorrect readings
Always make sure to select the correct product type for the material you are
measuring. This prevents taking incorrect readings (see
"13. Faults"
).