Smoke extraction blade damper ERK-MB
TECHNICAL DOCUMENTATION
Connection in and to smoke extraction ducts |
Construction subject to change
No return possible
Stand: 2019-10-08 | Page 15
CONNECTION IN AND TO SMOKE
EXTRACTION DUCTS
Connection options on the front side on or in horizontal
smoke extraction ducts
in accordance with EN 12101-7,
inspected according to EN
1366-8
Figure 14 - Connection in horizontal smoke extraction duct
Figure 15 - Front side connection to horizontal smoke extraction
duct
Examples of connection to smoke extraction duct
Figure 16 - Examples of connection to smoke extraction
duct
Please note
The connection is made via
bonding and sealing of the
contact surfaces and with the help of me-
chanical
fastening materials.
1 -- Housing of the ERK-MB
21 -- Smoke extraction duct
(to EN 12101-7, inspected according to EN
1366-8)
22 -- ERK-MB suspension
23 -- Security grille type ASG-E
25 -- Waterglass-based adhesive
(shown with dashed lines) - on site
26 -- Sleeve connection (width 100 mm, thickness 20
mm) with fastening material (coarse thread screw
≥ 3.9 × 45, distance ≈ 100 mm) - on site
27 -- Solid ceiling
flush outside
directly to the housing extension (L di-
mension; inner length of the housing)
flush inside
