Fiber Collimators Series 60FC
Adjustment_60FC 10.12.2020 © Schäfter+Kirchhoff GmbH
Schäfter+Kirchhoff GmbH Kieler Str. 212 22525 Hamburg, Germany +49 40 85 39 97-0 [email protected] www.sukhamburg.com
2
Now make sure that the connector of the fiber you want to attach matches the receptacle type of the fiber
collimator:
•
Use fibers with FC-APC (8°-polish) connectors for fiber collimators with an inclined coupling axis
(60FC-4).
•
Use fibers with FC-PC (0°-polish) connectors for fiber collimators with a coaxial axis
(60FC-0).
The fiber collimators are compatible to all fiber connectors type FC, including fiber connectors with end caps.
• Do not touch either the optical surface of the lens or the fiber end-face.
• If the coupler is not in use, reattach both rear and front protection caps.
Notice:
Refer to the laser instruction manual for all instructions regarding laser
safety!
• Do not stare directly into the laser beam (which can cause permanent
damage to the eyes).
• Do not stare at the reflected beam from reflective objects.
• Do not point the laser beam to other individuals.
Caution!
