Schaeffler Technologies
BA 35
11
Electronic evaluation system
The electronic evaluation system is mounted as follows:
Mount the housing of the electronic evaluation system on
the four mounting brackets (
⭋
4 mm) using four screws
(tightening torque 1 Nm to 2 Nm),
Figure 3
. Select the mounting
material in accordance with the surface underneath.
Lay the connection cable of the electronic evaluation system to
the controller in such a way that it is firmly laid and cannot flap.
Observe the minimum bending radius of the connection cable.
Connect the supplied plug M12 in accordance with the connection
plan to a 6 strand shielded twisted-pair cable with a cross-section
of 0,5 mm
2
and connect the plug to the electronic evaluation
system,
Figure 4
, page 13. With a cable length of more than 20 m,
signal disruptions may occur in individual cases.
The electronic evaluation system is mounted and connected to
the controller.
���
Electronic evaluation system
���
Mounting screws
(not included in scope of delivery)
Figure 3
Mounting of
electronic evaluation system
000B
5BBE
000B
5BBE
Summary of Contents for GreaseCheck
Page 1: ...Schaeffler GreaseCheck User manual...
Page 2: ......
