– 8 –
FOLDING THE LOOM
1.
To prevent treadles from dragging on
the floor when the loom is folded, attach
every treadle to at least one tie-up cord.
Loosen the two black fold knobs one full
turn and pull them up to start folding the
loom.
2.
With one hand on the rear beam and
one hand on the front beam, push the
loom together as far as it will go.
3.
Tighten the knobs. Push the slide lock
bars in towards the front of the loom.
4.
Lift the brake pedal back into the
closed position it arrived in (parallel to the
right rear leg) and push the brake cord
peg through a loop high enough in the
brake cord that it keeps the brake lever
safely out of the way for transport.
•
W
olf
P
uP
8.10 A
ccessorIes
WOLF TRAP
WOLF HEIGHT EXTENDER
LOOM BENCH
FRICTION BRAKE ADJUSTMENT
The friction brake can be adjusted by
tightening or loosening the eyebolt. This
will increase or decrease the tension on
the spring, which will in turn increase or
decrease the tension on the brake bar and
the brake cable.
Always press down on the brake pedal
while you are winding on the warp,
advancing the warp on the cloth beam,
or opening a warped loom.
FRICTION BRAKE ADJUSTMENT
spring
eyebolt
