– 8 –
W
olf
P
uP
8.10 A
ccessorIes
WOLF TRAP
WOLF HEIGHT EXTENDER
AND WOLF PUP 8.10
STROLLER
LOOM BENCH
ADJUSTING THE FRICTION BRAKE
24.
The friction brake can be adjusted by
tightening or loosening the eye bolt. This
will increase or decrease the tension on
the spring, which will in turn increase or
decrease the tension on the brake bar and
the brake cable.
Always press down on the brake pedal
while you are winding on the warp
or advancing the warp on the cloth
beam.
FOLDING THE LOOM
25.
To prevent treadles from dragging on
the floor when the loom is folded, attach
every treadle to at least one tie-up cord.
26.
Start folding the loom: Loosen the fold
knobs one full turn and pull them up in
their slots (Figure 1, page 3).
27.
With one hand on the rear beam and
one hand on the front beam, push the
loom together as far as it will go.
28.
Tighten the fold knobs. Push the slide
lock bars in towards the front of the loom.
29.
Lift the brake pedal back into the
closed position it arrived in (parallel to
the right outside leg; see Step 5) and
push the brake cord peg through a loop
high enough in the brake cord to keep
the brake lever safely out of the way for
transport.
•
FIGURE 15: ADJUSTING FRICTION BRAKE
eye
bolt
spring
brake bar
brake cable
