3)
Choose the type of CKP tone wheel
3.1) Teeth (10 ~ 100),
3.2) Missing (1 ~ 3),
3.3) Cuts per turn of the wheel. (1 ~ 3)
3.4) Type of sensor to emulate: 0 = Hall, 1 = Inductive
4)
Choose the rotation RPM. 400-800-1200-1600 RPM
5)
Edit the intake camshaft phase map (CMPi). Choose which
tooth of the CKP coincides with point A on the intake phase
map.
5.1) Use the + and - keys until you see A = 0 (or another
number)
5.2) Press OK
5.3) Use the + and - keys until choosing which tooth of the
CKP point A of the phase map coincides with.
5.4) Press OK
5.5) Repeat steps 5.1 to 5.4 with points B, C and all those that
correspond to the car to be verified.
5.6) As an example, the image map in the Read CKP section is:
A = 20, B = 80, C = 0.
5.7) Maps always end in 0.
5.8) You must select 0 in the last item to continue
6) Edit the phase map of the exhaust camshaft (CMPe) Choose
which tooth of the CKP coincides with point A of the phase
map.
The procedure is the same as with the admission tree, in case it
is not needed simply put A = 0;
7) Once the editing is finished and the pulses will begin to be
generated and the following appears on the screen:
23/36
