background image

53

 - 

www.SCEPTRE.com 

SCEPTRE X320BV-HD HDTV User Manual 

defect; or displays on which the serial number has been removed or defaced. Image Sticking 
caused by operating at excessive brightness levels for extended periods or mishandling are 
not covered by this warranty.  Installation, removal, transportation and reinstallation of a 
display and routine maintenance and cleaning, are not covered by this warranty.  Any 
hardware, components, and/or software bundled with the display are not covered by this 
warranty.  Any damages caused directly or indirectly by Buyer’s or Reseller’s “Value Added 
Feature” are not covered by this warranty or Sceptre, Inc.  Any damages of any kind including, 
but not limited to, direct or indirect damages, lost profits, lost savings, or other special 
incidental, exemplary or consequential damages whether for breach of contract, tort, or 
otherwise, or whether arising out of the use of or inability to use the product, even if 
SCEPTRE, INC. or any dealer, distributor of authorized service provider/partner has been 
advised of the possibility of such damages, or any claim by any other warranty are not 
covered by this warranty or Sceptre Inc. 
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED 
IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR LIABILITY FOR ANY 
AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, 
INCLUDING OUR NEGLIGENCE, ALLEGED DAMAGE OR DEFECTIVE GOODS, 
WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT 
EXCEED THE PURCHASE PRICE OF THE DISPLAY. WE SHALL NOT BE RESPONSIBLE 
FOR LOSS OF USE, COMMERCIAL LOSS OR OTHER INCIDENTAL OR 
CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW 
LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR 
EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and 
you may also have other rights which vary from state to state. This is the only warranty 
applicable; no one is authorized to extend or modify it or to grant any other warranty. 
SCEPTRE retains the right to assess all warranty claims and to determine if damages are 
covered by the warranty. In case of a claim that is not covered by the warranty, you will be 
contacted to determine whether SCEPTRE should repair the damage for a fee or whether the 
product should be returned to you as received by the repair center. 

 
Dead Pixel Policy

 

SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5 
dead pixels in a combination of color and brightness. Any number of dead or bad pixels under 
the limit is considered to be within normal performance specification of the LCD and is not 
considered defective.   

 
Owner’s Responsibility 

Effective Warranty Date 
Warranty begins on the date of sale to the end user. To ensure warranty service, keep the 
dated bill or sale receipt as evidence of the purchase date. If you can no longer obtain your 
receipt, the warranty will revert to the unit’s manufacture date according to the serial number 
of the unit.  This limited warranty applies only to the original purchaser and is non-transferable. 

 
Warranty Service 

For warranty service information, contact SCEPTRE Technical Support at email address 

[email protected]

, via phone at (800) 788-2878, or via World Wide Web chatting 

service at www.Sceptre.com. SCEPTRE Technical Support is available Monday to Friday 
8:30 AM to 5:30 PM Pacific Time.  Parts and service labor that are SCEPTRE’s responsibility 
(see above) will be provided without charge. Other services or services not covered by the 
warranty are at the owner’s expense. You must provide the model, serial number and date of 
purchase. Before you ask for warranty service, read your User Manual. You might avoid a 
service call. 
Warranty conditions are subject to change, for latest Warranty Terms and Conditions and 
additional information regarding your warranty, please see complete details online at 

www.SCEPTRE.com

Summary of Contents for X320BV-HD
























































Reviews: