SCEPTRE
X270 Page5
Tips and Safety Precautions
This product is designed and manufactured to operate within defined design limits, and misuse may
result in electric shock or fire. To prevent the product from being damaged, the following rules should
be observed for the installation, use and maintenance of the product. Read the following safety
instructions before operating the display. Keep these instructions in a safe place for future reference.
•
To avoid the risk of electric shock or
component damage, switch off the power
before connecting other components to the
X270 LCD MONITOR.
•
Unplug the power cord before cleaning the
X270 LCD MONITOR. Do not use a liquid
or a spray cleaner for cleaning the product.
Do not use abrasive cleaners.
•
Always use the accessories recommended
by the manufacturer to insure compatibility.
•
When moving the X270 LCD MONITOR
from an area of low temperature to an area
of high temperature, condensation may
form on the housing. Do not turn on the
X270 LCD MONITOR immediately after
this to avoid causing fire, electric shock or
component damage.
•
Do not place the X270 LCD MONITOR on
an unstable cart, stand, or table. If the
X270 LCD MONITOR falls, it can injure a
person and cause serious damage to the
appliance. Use only a cart or stand
recommended by the manufacturer or sold
with the X270 LCD MONITOR.
•
Any heat source should maintain a
distance of at least 5 feet away from the
X270 LCD MONITOR, i.e. radiator, heater,
oven, amplifier etc. Do not install the
product too close to anything that
produces smoke or moisture. Operating
the product close to smoke or moisture
may cause fire or electric shock.
•
Slots and openings in the back and bottom
of the bezel are provided for ventilation. To
ensure reliable operation of the X270 LCD
MONITOR and to protect it from
overheating, be sure these openings are
not blocked or covered. Do not place the
X270 LCD MONITOR in a bookcase or
cabinet unless proper ventilation is
provided.
•
It is not recommended to use the X270
LCD MONITOR in a portrait format (by
rotating 90 degrees) under high
temperature environment (25°C or higher),
since this would retard heat dissipation
and would eventually damage the monitor.
•
Never push any object into the ventilation
slots of the X270 LCD MONITOR. Do not
place any objects on the top of the Product.
It could short circuit parts causing a fire or
electric shock. Never spill liquids on the
X270 LCD MONITOR.
•
The X270 LCD MONITOR should be
operated only from the type of power
source indicated on the label. If you are not
sure of the type of power supplied to your
home, consult your dealer or local power
company.
•
The power cable must be replaced when
using different voltage from that specified
in the User Manual. For more information,
contact your dealer.
•
The X270 LCD MONITOR is equipped with
a three-pronged grounded plug, a plug
with a third (grounding) pin. This plug will
fit only into a grounded power outlet as a
safety feature. If your outlet does not
accommodate the three-wire plug, have an
electrician install the correct outlet, or use
an adapter to ground the appliance safely.
Do not defeat the safety purpose of the
grounded plug.