Sceptre X270 Manual Download Page 4

Page4                                                

SCEPTRE 

 X270 

 

Important Information 

 

 

Electricity is used to perform many useful functions, but it can also cause personal injuries and 

property damage if improperly handled.    This product has been engineered and manufactured with 

the highest priority on safety.    However, improper use can result in electric shock and / or fire.    In 

order to prevent potential danger, please observe the following instructions when installing, operating 

and cleaning the product.    To ensure your safety and prolong the service life of your Liquid Crystal 

Display, please read the following precautions carefully before using the product. 

 

1. 

Read these instructions. 

2. 

Keep these instructions. 

3. Heed 

all 

warnings. 

4. 

Follow all instructions. 

5. 

Do not use this apparatus near water. 

6. 

Clean only with dry cloth. 

7. 

Do not block any ventilation openings.    Install in accordance with the manufacturer’s 

instructions. 

8. 

Do not install near any heat sources such as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce heat. 

9. 

Do not defeat the safety purpose of the polarized or grounding-type plug.    A polarized plug 

has two blades with one wider than the other.    A grounding type plug has two blades and a 

third grounding prong.    The wide blade and the third prong are provided for your safety.    If 

the provided plug does not fit into your outlet, consult an electrician for replacement of the 

obsolete outlet. 

10.  Protect the power cord from being walked on or pinched particularly at the plugs, 

convenience receptacles, and the point where they exit from the apparatus. 

11.  Only use attachments/accessories specified by the manufacturer. 

12.  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold 

with the apparatus.    When a cart is used, use caution when moving the cart/apparatus 

combination to avoid injury from tip-over. 

13.  Unplug this apparatus during lightening storms or when unused for long periods of time. 

14.  Refer all servicing to qualified service personnel.    Servicing is required when the apparatus 

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has 

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to 

rain or moisture, does not operate normally, or has been dropped. 

Summary of Contents for X270

































Reviews: