ISD8001: Industrial ScentDirect
Diffusion System
Wall Mount Instructions
After affixing the mount to the wall, partially
screw in 2 of the M6-1x20mm machine screws
on the upper two mounting holes on the back of
the ISD8001. Now the ISD8001 can be lifted into
place onto the mounting plate of the wall mount
with the screws in the upper slots of the mount
plate shown here.
Now insert the 4 M6-1x12mm screws included
with the mount in the other four locations
shown here and tighten all the screws.
After it is mounted the machine can be pointed in any direction desired, but
please always take care that it is not pointing directly at any surfaces or objects
within 10 feet of the output duct.
