![Scell-it ELEMENT SIX User Manual Download Page 10](http://html1.mh-extra.com/html/scell-it/element-six/element-six_user-manual_1209331010.webp)
10 •
ELEMENT SIX - User Manual
ELEMENT SIX - User Manual
• 11
EN
FR
PL
CZ
IT
During the warranty period, the customer must not perform any alterations other than those permitted by the
manufacturer (maintenance). The repairs must be done by an authorized serice center.
To admit warranty repair, the customer must return the defective tool to the service center of the manufacturer
with the proof of purchase. Warranty is valid only if the tool is in its warranty period (12 months from the date of
purchase confirmed by the proof of purchase) and if the conditions of use have been respected.
Warranty is not valid if worn spare parts have to be replaced (further to a normal use of the tool).
This product (including battery and charger) shall not be treated as household waste. It shall be handed over
the applicable collection point for the recycling of electrical and electric equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of
materials will help to conserve natural ressources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you purchased
the product.
Where
Cause
Solution
Nosepiece
Wrong nosepiece mounted
Mount a correct nosepiece according to the
NOSEPIECES table §1 p.5.
Worn nosepiece
Replace by a new one
Jaws set
Mandrel blocked in jaws set
Clean/replace the jaw set by the additionnal set
provided in the pack or order a new jawset
Mandrel collecter full
(>100 mandrels)
Unmount and empty the mandrel container
Pusher
Worn pusher
Clean/replace the pusher
Warning lights
flashes
Low battery charge or
damaged battery
Charge or replace the battery
Tool capacity exceeded
Tool overheating
Let the tool cool down for a moment
The mandrel is stuck.
6
TROUBLESHOOTING
7
WARRANTY CONDITIONS
8
DISPOSAL OF OLD
ELECTRICAL & ELECTRIC
EQUIPMENT