SCE K8T800Pro-A, User Manual, Page: 38 / 99

32
Using BIOS
Advanced Chipset Features
These items define critical timing parameters of the motherboard. You should leave the
items on this page at their default values unless you are very familiar with the technical
specifications of your system hardware. If you change the values incorrectly, you may
introduce fatal errors or recurring instability into your system.
AGP & P2P Bridge Control [Press Enter]
DRAM Clock/Drive Control [Press Enter]
LDT & PCI Bus Control
[Press Enter]
VLink Data Rate [8X]
Init Display First [PCI Slot]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Advanced Chipset Features
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
AGP & P2P Bridge Control (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
AGP Aperture Size (128M)
This item defines the size of aperture if you use an AGP graphics adapter. The AGP aperture refers
to a section of the PCI memory address range used for graphics memory. We recommend that
you leave this item at the default value.
AGP 2.0 Mode (4X)
This item allows you to enable or disable the caching of display data for the processor video
memory. Enabling AGP-8X Mode can greatly improve the display speed. Users please note that
the default speed depends on the AGP cards. With 8x/4x/2x AGP cards inserted, the default speed
will be 8x/4x/2x. If you use the onboard VGA, the default setting will be 8x. When AGP card is AGP
3.0 compliant, this item will become “AGP 3.0 mode’’ with show only item.
AGP Aperture Size [128M]
AGP 2.0 Mode [4X]
AGP Driving Control [Auto]
AGP Driving Value DA
AGP Fast Write [Disabled]
AGP Master 1 WS Write [Disabled]
AGP Master 1 WS Read [Disabled]
AGP 3.0 Calibration cycle cycle [Disabled]
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
Advanced Chipset Features
X
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help