SCE K8T800Pro-A, User Manual, Page: 27 / 99

21
Installing the Motherboard
Before installing an add-on card, check the documentation for the card carefully. If
the card is not Plug and Play, you may have to manually configure the card before
installation.
For some add-on cards, for example graphics adapters and network adapt-
ers, you have to install drivers and software before you can begin using the
add-on card.
Follow these instructions to install an add-on card:
1 Remove a blanking plate from the system case corresponding to the slot you
are going to use.
2 Install the edge connector of the add-on card into the expansion slot. Ensure
that the edge connector is correctly seated in the slot.
3 Secure the metal bracket of the card to the system case with a screw.