Technical data Transmitter
AC adaptor Input
230V – 50Hz /Output: 6V = 300mA
Transmitter
4 channels
channel A:
2.414GHz
channel B: 2.432GHz
channel C:
2.450GHz
channel D: 2.468GHz
Bandwidth:
17,6MHz Power emission: <10mW
Receiver:
433.92MHz Modulation: FM
Video input signal: 1Vpp (type)/75 Ohms
Audio input signal: 1 Vpp (type) 600 Ohms
Receiver
AC adaptor Input
230V – 50Hz / Output 6V = 300mA
Receiver
4 channels
channel A:
2.414GHz
channel B: 2.432GHz
channel C:
2.450GHz
channel D: 2.468 GHz
Video output signal: 1Vpp (type) / 75 Ohms
Audio output signal: 1Vpp (type) / 600 Ohms
IR Extender
Power supply
2 x AAA 1,5V batteries
Frequency
433,92MHz
Power emission
<1mW
Cution: This equipment generates and uses radio frequency energy, and if not installed and used properly,
that is, in strict accordance with the manufactures instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply with the limits for remote control devices
in accordance with the specifications, which are designed to provide reasonable protection against such
interference will not occur in a particular installation. If this equipment does cause interference to radio or
television reception, which can be determined by unplugging the equipment try to correct the interference
by one or more of the following measures: Reorient the antenna of the radio/TV experiencing the
interference
.
Relocate the equipment with respect to the radio/TV. Move the equipment away from the
radio/TV. Plug the equipment into an outlet on a different electrical circuit from the radio/TV
experiencing the interference. If necessary, consult your local for additional suggestions. The
manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the users authority to operate the equipment.
Summary of Contents for Flexiview FS100
Page 15: ......