Scarlett Silver Line SC-VC80RW01, Instruction Manual

Page: 8 / 60

IM022
8 SC-VC80RW01
 If you have problems with application installing or device connecting to app, please refer to the
“Frequently asked questions” section in the app.
Power Off Button

Press “Power Off” Button, to turn off the robot.
Stand by

Press the “standby», pause the robot into standby mode
Auto Button

Press “Auto”, buzzer rings once, the robot will enter to auto cleaning mode.
Edge Button

Press
“Edge», buzzer rings once, the robot will enter to edge cleaning mode to clean along the edge of
the wall.
Spot Button

Press “Spot” button, buzzer rings once, the robot will enter to spot cleaning mode to start cleaning
specific areas.
Auto Charging Button

Press “Auto Charging”, buzzer rings once, enter to auto recharging mode.
Manual mode (You can choose to withdraw)

Press manual button into human operation
Start/Pause

To start cleaning.

To stop current cleaning mode.
Direction button

The robot will move according to selected direction (press the let/right for once, choose the direction you
want robot move, then press the forward/back)
Schedule Button

Press “Add Schedule”, enter schedule page to set a cleaning time.

Select a time you wanted and save it.

Click “save” on the top right corner.

Click “√’ to cancel the schedule.
Operation

To start working, presss the power button on the device for more than 3 seconds. The device will turn on
and go into standby mode. If you click the power button again, the device will start working automatically.
 Without connecting Wi-Fi, the device is in standby mode for more than 5 minutes, it will automatically turn
off;

With Connecting Wi-Fi, the device will not automatically turn off even if the device is in standby model for
more than 5 minutes.

To force the device to turn off, press the power button again.

To send the device to the base for recharging, press the return to base button on the device.
CLEANING BRUSHES

The debris that has stuck to the brushes and the hair that has wound up must be removed from time to
time. It is recommended to clean them after 4-5 cycles of operation.

Turn off the appliance. Gently clean the rotating brushes with the hard end of the cleaning brush that
comes with the kit.