Scarlett Silver Line SC-VC80RW01, Instruction Manual

Page: 5 / 60

IM022
5 SC-VC80RW01
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Read this instruction manual carefully to prevent any unit damage or
injure when using.

When using this appliance, basic precautions should always be
followed:

Before the first use of the appliance check that the voltage indicated
on the rating label corresponds to the mains voltage in your home.

For home use only. Do not use for industrial purposes.

To reduce the risk of electric shock, do not use outdoors or on wet
surfaces. Do not immerse unit or cord in any liquids.

To avoid deforming of plastic components of the appliance or fire
accident, never leave the appliance exposed to direct sun light or
near any heater.

The appliance is not intended for use for physically, sensory or
mental disabled person (including children) or for person with lack of
life experience or knowledge, if only they are under supervision or
have been instructed about the use of the unit by responsible person.

This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Сleaning and user
maintenance shall not be made by children without supervision.

Children must be under control in order not to be allowed to play with
the appliance.

Never use the vacuum cleaner without filters.

Do not attempt to repair, adjust or replace parts in the appliance.
Repair the malfunctioning appliance in the nearest service center.

If the product has been exposed to temperatures below 0ºC for some
time it should be kept at room temperature for at least 2 hours before
turning it on.

In case of power cord is damaged, its replacement should be done by
the manufacture or service department or the other high-skill person
to avoid any danger.

The manufacturer reserves the right to introduce minor changes into
the product design without prior notice, unless such changes
influence significantly the product safety, performance, and functions.

Manufacturing date is indicated on the unit and/or on packing as well
as in accompanying documents in the following format XX.XXXX
where first two figures XX is the month of production, and following
four figures XXXX is the year of production.