Scarlett SC-VC80C95, Instruction Manual

Page: 4 / 8

IM018
www.scarlett.ru SC-VC80C95
4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Read this instruction manual carefully to prevent any unit
damage or injure when using.

When using this appliance, basic precautions should always
be followed:

Before the first use of the appliance check that the voltage
indicated on the rating label corresponds to the mains
voltage in your home.

For home use only. Do not use for industrial purposes.

To reduce the risk of electric shock, do not use outdoors or
on wet surfaces. Do not immerse unit or cord in any liquids.

To prevent risk of electric shock and fire, do not immerse the
appliance in water or any other liquids. If it has happened DO
NOT TOUCH the appliance, unplug it immediately and check
in a service center.

Do not handle the plug with wet hands. Never switch off the
appliance by pulling the cord.

Do not let the cord hang over sharp edges or touch hot
surfaces.

Always unplug the appliance from the power supply when not
in use and before servicing.

Do not use appliance with damaged cord or other defects.
Do not attempt to repair the appliance, adjust or replace any
parts. In case of malfunction, contact the authorized service
center for examination, repair, electrical or mechanical
adjustment.

To avoid deforming of plastic components of the appliance or
fire accident, never leave the appliance exposed to direct sun
light or near any heater.

This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliances by a person responsible for their
safety.

Children should be supervised to ensure that they do not
play with the appliance.

To avoid damage of the flexible hose, do not fold or pull it
strongly.

Do not put any object into air outlets. Do not use with outlet
blocked. Keep free of dust, hair and anything that may
reduce airflow.

Be careful when cleaning on stairs.

Before you start using the vacuum cleaner, please remove all
large or sharp objects from the floor in order to prevent
damage of the unit.

CAUTION: To avoid voltage overload do not plug the unit
and other powerful electrical appliances to the power supply
at the same time.

Never use the vacuum cleaner without filters.

Do not use the appliance on wet surfaces. This unit does not
absorb water.

If you have cleaned the carpet with liquid detergent, let the
carpet dry up completely before vacuuming it.

Never use the appliance without dust bin. Replace the dust
bin without delay if it is damaged.

Do not attempt to repair, adjust or replace parts in the
appliance. Repair the malfunctioning appliance in the nearest
service center.

If the product has been exposed to temperatures below 0 ºC
for some time it should be kept at room temperature for at
least 2 hours before turning it on.

The manufacturer reserves the right to introduce minor
changes into the product design without prior notice, unless
such changes influence significantly the product safety,
performance, and functions.

Production date mentioned on the unit and/or on the packing
materials and documentations.
PREPARATION

Unpack the device and remove the sticker from the body.

In order to connect the hose to the vacuum cleaner insert
hose base into sucking inlet and turn clockwise until it stops,
disconnect the hose, turn it in the opposite direction.

Insert the hose into the tube.

Attach one of the nozzles to the tube:

The "FLOOR/CARPET" combined nozzle is designed for
carpet mats and similar floor coatings, and for flat surfaces;

The "FURNITURE/SLOT" nozzle is designed for cleaning
upholstered furniture, curtains and decorative surfaces.
INSTRUCTION FOR USE

"Cyclone" system ensures maximum power during cleaning.

Before starting, unwind the cord to sufficient length and insert
the plug into the power supply. The yellow mark on the cord
shows optimal cord length. Do not unwind the cord beyond
the red mark.

Press On/Off button to switch the unit on and press again to
stop it.

You can adjust the air flow using the air flow regulator on the
flexible hose handle:

Decrease flow for cleaning curtains, books, furniture, etc.

Increase flow for cleaning bare floor.

To rewind the cord, press the rewind button and guide the
cord with hand to ensure that it does not whip causing
damage.

WARNING!

Be sure to clean the container after each cleaning.

Never use the vacuum cleaner without installed filter and with
damaged or dirty filter. Otherwise, dust will fall into the motor
and cause damage to the vacuum cleaner.

Don’t use the vacuum cleaner if the container is filled to the
mark “MAX”. When the container is filled, dirty air clogs up
the vacuum cleaner filter and the engine can overheat and
disable.
 Don’t use the vacuum cleaner for cleaning of material debris
such as cement, whitewash, plaster, metal shavings and etc.
These particles cause to the engine damage.
 Don’t wash vacuum cleaner parts in a dishwasher or a
construction machine.
CARE AND CLEANING

Switch off the appliance and pull the plug from the power
supply.

Clean the appliance outside surface with soft cloth using mild
non-abrasive detergent.

Vacuum cleaner or cord should never be immersed into
water or any liquids.
DUST COLLECTOR CLEANING

Disconnect the vacuum cleaner from the mains.

Detach the dust collector. For this purpose press the dust
collector lock button.

Empty the dust collector. For this purpose press the dust
collector release button.
CLEANING OF FILTERS

Clean the filters at least once a year. In case if the vacuum
cleaner is used frequently, wash the filters after each 3 to 5
dust collector cleaning operations.

Disconnect the vacuum cleaner from the mains.

Open the dust collector cover and remove the main filter.

Wash all plastic parts and sponge of the filter with warm
running water, and then dry them thoroughly.

After cleaning insert the filter into place. Close the dust
collector cover rotating it clockwise.

Wash the filter with running water and dry it thoroughly.

After cleaning insert the filter into place.
STORAGE

Place the appliance vertically.

Insert the tube into special holder on the body.

The symbol on the unit, packing materials and/or
documentations means used electrical and electronic units
and battery’s should not be toss in the garbage with ordinary
household garbage. These units should be pass to special
receiving point.

For additional information about actual system of the
garbage collection address to the local authority.

Valid utilization will help to save valuable resources and
avoid negative work on the public health and environment
which happens with incorrect using garbage.