Scarlett SC-GS130S08, Instruction Manual, Page: 6 / 36

IM022
www.scarlett.ru SC-GS130S08 6

ATTENTION! To avoid scalding please always unplug the
garment steamer before attaching or detaching the fabric
brush and allow it to cool completely.

ATTENTION! The garment steamer generates high
temperatures of steam. Do not touch the steam head, make
sure the steamer is facing away from you in an upright
position.

ATTENTION! When using the garment steamer, make sure
the steamer head is facing away from you and in an upright
position.

If the product has been exposed to temperatures below 0ºC for some time it should be kept at
room temperature for at least 2 hours before turning it on.

The manufacturer reserves the right to introduce minor changes into the product design
without prior notice, unless such changes influence significantly the product safety,
performance, and functions.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying
documents in the following format XX.XXXX where first two figures XX is the month of
production, and following four figures XXXX is the year of production.
PREPARATION FOR USE
 Unpack the appliance.
 Before connecting the appliance to mains, assemble it fully and properly.

Adjust the telescopic stand to the comfortable height.

Secure the stand height, using stand height adjustment locks.
 Insert the stand into the stand opening located in the base unit, and screw the locking
mechanism up to the stop. To remove the stand, unscrew the locking mechanism.

Attach the hangers to the stand, screwing them on the upper part of the stand up to the stop.
 Attach the hose to the hose connector.
WATER FILLING

Pull the tank handle and detach the water tank.

Turn the tank over and unscrew the lid.
 Fill the water tank. Please observe the maximum level mark, do not overfill.

Screw and tighten the tank lid.

Install the tank in place.
 If the tank is empty, first turn off the steamer, then unplug it and add water.

Place the assembled appliance on a firm and level surface. The appliance is ready for
operation.
OPERATION

Connect the appliance to mains.

Hang the clothes on the hangers for steaming.

Turn the On/Off regulator, indicator will illuminate.
 The appliance is ready for steaming.
STEAMING

Move the steamer attachment slowly up and down along the clothes until you reach the
desired result.

Make sure that the hose is not twisted during operation.

Prior to steaming, check the tag on the clothes to make sure that the clothes can be exposed
to steam. Some materials, such as leather, chamois and velvet, may not be suitable for
steaming.

Touch the clothing with the attachment slightly during steaming.

Always hold the attachment in a vertical position, so that the condensate will flow back into the
steamer. If steaming is performed in a horizontal position, lift hose frequently to allow the
condensate to drain back.