Scarlett SC-ET10D11, Instruction Manual

Page: 4 / 16

IM015
www.scarlett.ru SC-ET10D11
4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid
damage due to incorrect use.

Before the first switching on check that the voltage indicated on the rating label corresponds to the mains voltage in
your house.

Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.

For home use only. Do not use for industrial purposes.

Always unplug the appliance from the power supply when not in use.

Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall
socket immediately and have the unit checked by an expert before using it again.

Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In
such cases take the appliance to a qualified specialist for check and repair if necessary.

Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.

To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.

Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under
curtains and shelves.

Do not leave the appliance unattended when in use.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliances by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

ATTENTION: Do not open the lid while water is boiling.

Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot
water may overflow.

The kettle is for heating water only, not for any other purposes and liquids.

Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest
service center.
 IПăЭСОăЩrШНЮМЭăСКsăЛООЧăОбЩШsОНăЭШăЭОЦЩОrКЭЮrОsăЛОХШаă0ºӨăПШrăsШЦОăЭТЦОăТЭăsСШЮХНăЛОăkОЩЭăКЭărШШЦăЭОЦЩОrКЭЮrОăПШră
at least 2 hours before turning it on.

The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless
such changes influence significantly the product safety, performance, and functions.

Production date mentioned on the unit and/or on the packing materials and documentations.
BEFORE USING FOR THE FIRST TIME

Remove all packing materials and stickers from the kettle.

Fill the thermo pot with cool water up to the maximum level mark and boil it. Empty the thermo pot. Repeat this
operation. The appliance is ready for use.
INSTRUCTION FOR USE
FILLING

Fill a thermo pot through a orifice in opened cover. Do not fill with less than 0.5 l of water to prevent the thermo pot
from operating dry and do not fill more than 2.5
Хă(ЮЩăЭШăįFULL”ăЦКrk)
SWITCHING ON

Place the thermo pot filled with water on a plane surface.

Connect the plug to the power supply. The appliance will begin to operate and boiling indicator will light.
KEEP WARM FUNCTION

When the water is boiled thermo pot will automatically switch to keep warm function. The boiling light indicator will go
off and keep warm light indicator.

NOTE: This appliance has a safety system, which automatically switches off heating element if the appliance
inadvertently has been switched on when empty, or if it operates dry.
RE-BOILING FUNCTION

Keep warm function temperature is lower than boil temperature. In case of need thermo pot allows to boil warm
water quickly.
WATER POURING OPTIONS
Mechanical

This option is available even when the device is unplugged from the socket.

Place the cup under the water spout.

Press the mechanical water dispensing button several times.

WARNING! For safety reasons the appliance is equipped with the water supply interlock.

To unlock, set the interlock switch to the position. To lock, set the interlock switch to the position.
REFILL

To prevent the thermo pot from operating dry add water that its level in the appliance was not lower than mark "MIN"
SWITCHING OFF

To switch off the appliance disconnect it from the power supply.
CARE AND CLEANING

Always remove the plug from the socket and let the appliance cool down completely.

Open the lid and pour water out through the orifice.