Scarlett SC-EK21S101, Instruction Manual

Page: 6 / 36

IM022
www.scarlett.ru SC-EK21S101 6

Pour the solution out and rinse the kettle inside carefully avoiding fall water on the electric
contacts.

Repeat the procedure if necessary.
INSTRUCTION FOR USE
FILLING

Remove the kettle from the base unit.

You can fill the kettle with water via the spout or neck with opened lid.

Do not fill the kettle with less than 0.5
l of water (less than “MIN” mark) to prevent it from
operating dry and more than 1.8
l (up to “MAX” mark) to avoid overfilling and water spilling out
during the boiling.
SWITCHING ON

After filling with water, place the kettle on the base unit.

Connect the plug to the power supply and push On/Off switch. The appliance will turn on and
indicator will light.
SWITCHING OFF

When water begins to boil, the kettle will switch off automatically and indicator light will go off.

NOTE: This appliance has a safety system, which automatically switches heating element off
if the appliance inadvertently has been switched on when empty, or if it operates dry. In this
case let the appliance cool down 10 minutes before filling with water again.
SWITCHING ON AGAIN

If the kettle has been switched off automatically, it can be switched on again after cooling for
15-20 seconds.
CARE AND CLEANING

Open the lid and pour out the water through the orifice.

Always remove the plug from the socket and let the appliance cool down completely.

Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry
cloth. Do not use any abrasive materials.

Remove scale regularly, using special descaling agents, available at the market, following
given instructions.
FILTER CLEANING

Remove the filter out of the kettle.

Place it under a jet of water and rub gently with a soft brush (not included).

Return the filter to its place.
STORAGE

Switch off and unplug the appliance; let it entirely cool.

Complete all requirements of Chapter CLEANING AND CARE.

The cord can be wrapped around the base area for storage.

Keep the appliance in a dry cool place.
The symbol on the unit, packing materials and/or documentations means used electrical
and electronic units should not be toss in the garbage with ordinary household garbage. These
units should be pass to special receiving point.
For additional information about actual system of the garbage collection address to the local
authority.
Valid utilization will help to save valuable resources and avoid negative work on the public
health and environment which happens with incorrect using garbage.