IM010
4
SC-411
•
Connect the multi-cooker to the power supply. Never connect the appliance to the electrical supply network before all
the preparations have been completed as this may cause breakage.
•
Press the «Pastry/Soup» button on the control panel. The indicator of the button will illuminate.
•
The display will show 00:40. The «Pastry / Soup» program will start in 5 seconds.
•
Under the default settings the multi-cooker will cook pastry or soup for 40 minutes. If necessary, you can prolong or
shorten the cooking time with the use of the timer. For this press the «Timer» button in the centre of the panel. You
can set the cooking time from 30 minutes to 2 hours. One step is 5 minutes.
•
When the food is done the indicator of this mode will go out and you’ll hear a sound signal, the multi-cooker will
automatically switch to the heating mode, the indicator of the heating mode will illuminate.
•
Disconnect the multi-cooker from the power supply.
ASPIC / BRAISING PROGRAM (
ХОЛОДЕЦ / ТУШЕНИЕ)
•
This program is used for braising products and preparing aspic.
•
Put all ingredients and seasonings into the pot of the multi-cooker in accordance with the recipe.
•
Place the pot in the multi-cooker.
•
Close the lid and press it down until it snaps shut.
•
Connect the multi-cooker to the power supply. Never connect the appliance to the electrical supply network before all
the preparations have been completed as this may cause breakage.
•
Press the «Aspic/Braising» button on the control panel. The indicator of the button will illuminate.
•
The display will show 01:00. The «Aspic / Braising» program will start in 5 seconds.
•
Under the default settings the multi-cooker will work for 60 minutes. If necessary, you can prolong or shorten the
cooking time with the use of the timer. To change time press the «Timer» button in the centre of the panel. You can set
the cooking time within the range from 30 minutes to 5,5 hours. One step is 30 minutes.
•
When the food is done the indicator of this mode will go out and you’ll hear a sound signal, the multi-cooker will
automatically switch to the heating mode, the indicator of the heating mode will illuminate.
•
Disconnect the multi-cooker from the power supply.
FOOD STEAMER PROGRAM
(ПАРОВАРКА)
•
This program is used for steaming products.
•
Food Steamer program operates when a steamer container is used. It’s important to know that the time of steaming is
limited by the amount of water poured into the pot. Make sure you pure enough water to last through the entire cooking
process. In case the water is completely evaporated the program will automatically stop.
•
Pour enough water into the pot (see the table below for the approximate amount of water).
Cooking time
Approximate amount of water, measuring cups
10-30 minutes
4
30-60 minutes
5
•
Put products in the steamer container and place it in the pot. Place the pot in the multi-cooker.
•
Close the lid and press it down until it snaps shut.
•
Connect the multi-cooker to the power supply. Never connect the appliance to the electrical supply network before all
the preparations have been completed as this may cause breakage.
•
Press the «Food Steamer» button on the control panel. The indicator of the button will illuminate.
•
The display will show 00:10. The «Food Steamer» program will start in 5 seconds.
•
Under the default settings the multi-cooker will steam food for 10 minutes. If necessary, you can prolong or shorten the
cooking time with the use of the timer. To change time press the «Timer» button in the centre of the panel. You can set
the cooking time within the range from 1 minute to 60 minutes. One step is 1 minute.
•
When the food is done the indicator of this mode will go out and you’ll hear a sound signal, the multi-cooker will
automatically switch to the heating mode, the indicator of the heating mode will illuminate.
•
Disconnect the multi-cooker from the power supply.
YOGHURT/HEATING/SHUTDOWN BUTTON (
ЙОГУРТ / ПОДОГРЕВ / ОТКЛЮЧЕНИЕ)
•
This mode is used for preparing yoghurts, turning on of the heating mode and shutting down of the multi-cooker.
•
To prepare a yoghurt pour a little water into the pot of the multi-cooker and put previously prepared jars with special
mixture into the water (see the cookbook for the composition of the mixture).
•
Close the lid and press it down until it snaps shut.
•
Connect the multi-cooker to the power supply. Never connect the appliance to the electrical supply network before all
the preparations have been completed as this may cause breakage.
•
Press the «Yoghurt/Heating/Shutdown» button. The indicator of the button will illuminate. The display won’t show the
cooking time.
•
When the required time runs out (see the cookbook) disconnect the multi-cooker from the power supply.
•
The «Keep Warm» mode switches on automatically after the programmes: «Roasting/Int. Products», «Pastry/Soup»,
«Milk Porridge/Cereals», «Steamer», «Aspic/Braising» finish.
•
This programme keeps the food’s temperature at 65-
85°С.
•
To stop the «Keep Warm» function press and hold the «Yogurt/Keep Warm/Off» button.
•
To switch on the Keep Warm function press the «Yogurt/Keep Warm/Off» button.
•
The «Off» function is used to stop the cooking programme. To stop cooking press and hold the «Yogurt/Keep
Warm/Off» button.
MILK PORRIDGE / CEREALS PROGRAM (
МОЛОЧНЫЕ КАШИ / КРУПЫ)
•
This program is used for preparing different types of porridge and pilaf.
•
Measure cereal with a measuring cup in accordance with the recipe. If necessary, you should previously wash the
cereal. Never use for this purpose the pot of the multi-cooker as you may damage its covering.
