Scarlett Indigo Innovation IS-512, Instruction Manual

Page: 5 / 37

GB
INSTRUCTION MANUAL
When the steam iron heats up to the selected temperature,
the display will stop blinking.
Press the temperature control button several times to
sequentially set the temperature to 140°С, 175°С, 200°С. If
current setting is 200°С and the temperature control but-
ton is pressed, the steam iron will switch off.
2.2. THE WATER TANK FILLING
Unplug the iron before filling.
Pull out the water inlet plug and slowly pour water into
the tank with the help of the plastic beaker.
Stop the water inlet with the plug.
Do not fill higher than mark on the water tank, in order to
avoid spilling out of water.
Your steam iron is designed to use tap water.
However, if the water is very hard, it is advisable
to use distilled water.
The water tank should be emptied after each use.
If you empty the water tank after the steam
iron has cooled down, set the steam iron in an
upright position on its heel rest, plug it in and set
the temperature control dial to the maximal posi-
tion, heat for 2 minutes. Unplug the steam iron
from the power supply.
2.3. SPRAYING
As long as there is enough water in the water tank, you
may use the spray button at any temperature setting
either on steam or dry ironing.
Press the spray button several times to activate the
pump while you are ironing.
•
•
•
•
•
•
•
•
•
2.4. STEAM IRONING
Set the temperature to 175°С or 200°С. The display will
show
Set the variable steam control to
position.
Avoid coming in contact with ejected steam.
2.5. DRY IRONING
The steam iron can be used on the dry setting with or
without water in the water tank, however it is best to
avoid having the water tank too full while dry ironing.
Set the variable steam control to position.
Do not refill the steam iron with water until the
it has cooled down.
2.6. BURST OF STEAM
The burst of steam feature provides additional steam for
removing stubborn wrinkles.
Set the temperature to 175°С or 200°С. The display will
show
Set the variable steam control to position.
Press the powerful steam button to release the burst of
steam.
To prevent water leakage from the soleplate, do
not keep the powerful steam button pressed for
more than 5 seconds.
2.7. VERTICAL STEAM
Ensure that there is enough water in the water tank.
Stand the steam iron on its heel rest on an iron-safe sur-
face and plug it.
•
•
•
•
•
•
•
•
•
•