Scarlett Comfort SC-SF111B28, Instruction Manual

Page: 7 / 7

IM019
www.scarlett.ru SC-SF111B08 7
ASSEMBLING INSTRUCTIONS:

The device is intended for air circulation in the
room.

Fan is packed disassembled. Before assembling
make sure that all the required parts are
undamaged and included into the set.

Do not plug in the device before its assembling is
finished.

Tighten stand tube to stand base with screw. Fix
base cover to stand base with a screw (supplied
with a set).

Unscrew out-joint, put the stand cover and base
cover on the stand base, pull the extension pole out
then tighten the out-joint again.

Place control box firmly on top of extension pole,
tighten screw B.

Unscrew the blade cap by turning clockwise and
rear mesh nut by turning counter clockwise and put
both blade cap and rear mesh nut off the motor
shaft.

Put rear mesh on motor shaft.

Secure it with rear mesh nut.

Slide blades on motor shaft so that claws on motor
shaft match the blades slots.

Screw blade cap on shaft by turning counter
clockwise.

Put front mesh on rear mesh and close clips or
screw mesh ring to secure meshs together.

Adjust the fan vertically by vertical adjustment
screw.

The fan is ready for work.
OPERATION MANUAL
CAUTION: To avoid electroconvulsive shock or fire
danger, do not operate fan under the conditions of
increased humidity.

Place fan only onto dry flat unyielding surface.
-
“1” For minimum operational speed;
-
“2” For medium operational speed;
-
“3” For maximum operational speed;
-
“0” The fan is switched off;

On the upper part of the motor cover there is
oscillating knob. If pressed, it makes the fan
cabinet with blades traverse from side to side. To
cancel oscillating mode push oscillating knob
upward.

To swit
ch the fan off push the button “0”
MAINTENANCE

Before cleaning unplug fan first.

Clean front and rear meshs, blades, stand tube and
stand base with soft moistened cloth and wipe dry.

Do not use abrasive cleansers
STORAGE

Keep the device in normal conditions in dry place.
The symbol on the unit, packing materials
and/or documentations means used electrical and
electronic units and battery’s should not be toss in
the garbage with ordinary household garbage. These
units should be pass to special receiving point.
For additional information about actual system of the
garbage collection address to the local authority.
Valid utilization will help to save valuable resources
and avoid negative work on the public health and
environment which happens with incorrect using
garbage.