Scarlett comfort SC-IR250D04, Instruction Manual

Page: 4 / 16

IM022
www.scarlett.ru SC-IR250D04 4
installed in its intended normal operating position and they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children aged from 3 years and less than 8 years shall not plug
in, regulate and clean the appliance or perform user
maintenance.

Children should be supervised to ensure that they do not play
with the appliance.

Do not leave appliance unattended while operating.

The appliance must be used only in the upright position.

To avoid burns, do not touch during operation to the heated
surface of the device.

Unit surface temperature of the appliance is high, thus do not
touch it.Operating unit should be far away from the flammable or
easy bulging under high temperature objects.The heater must not
be located immediately below a socket-outlet.

If you lift or overturn working appliance, safety lock system will
switch it off. When you stand the appliance properly it will
continue operating.

Statement: heater is not located immediately below a socket-
outlet

CAUTION
— Some parts of this product can become very hot
and cause burns. Particular attention has to be given where
children and vulnerable people are present.

WARNING: This heater is not equipped with a device to control
the room temperature. Do not use this heater in small rooms
when they are occupied by persons not capable of leaving the
room on their own, unless constant supervision is provided.
CAUTION:

Do not cover the appliance when in use .

To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.

Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning
appliance in the nearest service center.

If the product has been exposed to temperatures below 0ºC for some time it should be kept at
room temperature for at least 2 hours before turning it on.

The manufacturer reserves the right to introduce minor changes into the product design without
prior notice, unless such changes influence significantly the product safety, performance, and
functions.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying
documents in the following format XX.XXXX where first two figures XX is the month of production,
and following four figures XXXX is the year of production.
USING THE APPLIANCE

Set the modes switch to position
«O».