Fig 22. Starting setup
Fig 23. Starting setup of clock
Fig 24. Starting setup of button
“Source”: trigger source, including Clock, Button, Equivalent interval, Limit-surpassing
and serial. Applications of each trigger source are listed in the Table 3:
When choosing “Clock”, “Date” and “Time” are displayed on the screen. You can preset a
certain time, and when the preset time is reached, the instrument will automatically
start measuring. You can move the cursor on Year, Month, Day, Hour, Minute and Second
either, and use or key to adjust the time. When a parameter reaches its end, it
displays “**” which means the parameter does not participate in comparison. The
instrument can be triggered once an hour, once a day, or once a month.
When choosing “Button”, the screen displays as follows:
Table 3 Applications of the trigger sources
6.5.1.1 The timing start
6.5.1.2 Button start
No
1
2
3
4
5
Source
Clock
Button
Equivalent
interval
Limit-surpassing
serial
Remarks
Start when reach the specified time
Start by pressing the Button
Start when each time measurement
has the equivalent intervals
Start when the current value exceeds
the specified limit value
Continuously measure
15