RE-SET FACTORY SETTINGS
•
If you have forgotten your PIN or want to revert the unit back to its factory settings
please follow the below steps:
•
Press and hold N for 3 seconds until the 1- 4 Red LED’s flash enter PIN 4726
•
You now have 15 seconds to complete the following sequence
•
Press S and hold until all LED’s flash twice
•
Press R and hold until all LED’s flash twice
•
Press N and hold until all LED’s flash twice
•
All number LED’s will now scroll down from 10-1 indicating the factory re-set and the
system will switch off.
•
Please note the pin will have now been re-set to the default 10,10,10,10
OPTION SETTINGS
Several of the features of the unit can be turned On/Off by following the below steps
To enter option setup mode, unlock system first if locked then press and hold ‘S’ for 3
seconds until all number LED’s scroll from 1 to 10;
•
Use the number buttons to toggle the items listed below.
•
Press ‘POWER’ to save and quit.
•
All the number LED’s will scroll down from 10 to 1;
Default
1.
Auto timer enabled
(on)
2.
Enable light sensor
(on)
3.
Enable PIR and Remote start at night
(off)
4.
Enable low power standby mode
(on)
5.
Disable Variable Volume if set to on
(off)
6.
7.
8.
9.
10.
Test mode, short timings
(off)
Page 14
