SCARAB MINOR Euro 3
Amdt.1 - 19 August 2003
Operator’s Manual
Page 21
3.
PROGRAM ENABLE. This enables access to the calibration factors
(CAL Mode 1). This mode is only accessible when the security link in
in position and is used to set the calibration factors for each
channel.
4.
FAN SPEED SELECTION. This enables the current speed of the
Suction Fan to be displayed. When pressed, fan speed will be
displayed, remaining on-screen for a brief period (approximately 5
sec) before reverting to the default channel display
5.
RESET - This resets either the Work Hours or Work Distance display to
ZERO, dependent upon the channel selected. The security link
must be in position for this procedure.
ORIGINAL MODEL
DESCRIPTION
1.
CHEVRON BUTTON - Used to select and display the monitor’s various
channels/functions. This is achieved by pressing, and holding
down, the Chevron Button until the Chevron Pointer moves to the
required channel position.
2.
The Engine Speed display is accessed by pressing, and holding
down, the Chevron Button until the Chevron Pointer moves to the
channel six position, this becomes the active channel.
3.
When engine speed adjustment is completed, reselect Channel
One (Forward Speed).
Alternatively, the instrument will default to Forward Speed mode
automatically as soon as a speed of approximately 9 mph / 15 kph
is achieved in Drive Mode.
Fig. 15 The RDS Sweeper Monitor
METRIC/IMPERIAL
INDICES
DISPLAY
CHANNELS 1 to 6
CHANNEL SELECTION
INDICATOR (Chevron)
1 - Forward Speed
2 - Engine Hours
3 - Sweeping Hours
4 - Total Distance (x 10)
5 - Sweeping Distance
6 - Engine Speed
CHANNEL SELECTION
BUTTON
CHANNEL FUNCTIONS
drivemanVM.fm Page 21 Tuesday, August 19, 2003 11:43 AM
