SCARAB MINOR Euro 3
Page 18
Operator’s Manual
Original Issue - 19 August 2003
OPERATING PROCEDURE - SWEEP MODE
CAUTIONS:
The vehicle MUST be brought to a complete standstill, the handbrake
applied and Neutral selected BEFORE Sweep Mode is selected.
1.
Stop the vehicle, release the foot throttle and apply handbrake.
2.
Engage NEUTRAL on the Forward/Reverse Lever.
3.
Ensure that the suction fan is OFF and turn the Key Switch to
Position 1. The Sweep Mode indicator will illuminate (GREEN),
confirming Sweep Mode (the sweep controls are now active).
4.
Press the
symbol on the RDS Sweep Monitor, until engine RPM
is displayed (page 20) and rotate the Engine Speed Control
clockwise until the required engine speed is achieved (1380 rpm is
the most efficient setting for normal sweeping duties.)
Fig. 13 LHD Control Panel layout (right-hand-drive panel is mirror image of this)
FUEL
GAUGE
GLOW PLUG
INDICATOR
IGNITION
LIGHT
BRUSH
SIDE BRUSH
WIDE SWEEP
ON/OFF
SUCTION
FAN ON/OFF
NEARSIDE FRONT
BRUSH ON/OFF
OIL
LIGHT
BRAKE
FLUID
SWEEP MODE
CRUISE CONTROL
INDICATOR
CRUISE CONTROL
BUTTON
SIDE BRUSH
SPRAY
FRONT BRUSH
SPRAY
WIDESWEEP
SPRAY
HOPPER TIP
WORKLIGHTS
HIGH-PRESSURE
FORWARD/
REAR FOG LAMPS
ENGINE
SPEED
SWEEP MODE
KEY SWITCH
BEACON
RADIO
WATER
MAIN BEAM
WARNING
PUMP*
REVERSE LEVER
GOBBLER FLAP
FRONT BRUSH
SWING OUT
TURN INDICATOR
REPEATER
TEMP
ON/OFF
MASTER
SWITCH
SWEEP
MONITOR
HEATER FAN
SWITCHES ON DOOR
NOTE:
The control panel illustrated is
for a Left Hand Drive machine.
Right hand Drive panels are
the reverse of this layout.
& INDICATORS
OFFSIDE FRONT
BRUSH ON/OFF
AIR CON
drivemanVM.fm Page 18 Tuesday, August 19, 2003 11:43 AM
