manualshive.com logo in svg

Scantronic iNSIGHT 20, Operator'S Manual, Page: 92 / 167

Share
Download
Scantronic iNSIGHT 20 Operator'S Manual Download Page 92

Operator’s Guide

81

Chapter 4:

Maintenance

Precautions

Cleaning your scanner and preventative maintenance on a 

regular basis is required to ensure the best possible data 

quality. Some guidelines follow:
•

Do not use canned/compressed air as this can force 

dust into difficult to clean areas.

•

Use only the recommended cleaning supplies. 

•

Using unapproved cleaning fluids or solvents may 

damage the foam tires.

•

Some document types generate more paper dust and 

debris and may require more frequent cleaning than 

recommended. 

•

Some debris from the foam tires on the feed and 

separator modules is normal. Tire debris does not 

always mean that the tires are worn or damaged. After 

cleaning, inspect the tires for wear and replace the 

separator module or feed module if necessary.

4

In this chapter:

Maintenance Schedule. . . . . . . . . . . . . . . . . . . . . page 83
Supplies and Consumables . . . . . . . . . . . . . . . . . page 85
Opening and Closing the Scanner Cover. . . . . . page 87
Running a Transport Cleaning Sheet . . . . . . . . . page 89
Cleaning the Rollers and Transport . . . . . . . . . . page 90
Cleaning the Separator Module  . . . . . . . . . . . . . page 91
Cleaning the Feed Module . . . . . . . . . . . . . . . . . page 92
Cleaning the Imaging Guides . . . . . . . . . . . . . . . page 94
Cleaning the Ultrasonic Multi-feed Detector. . . page 95
Removing and Replacing the Separator Module . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 97

Replacing the Separator Module Tires . . . . . . . . page 99
Replacing the Pre-Separation Pad  . . . . . . . . . .  page 101
Adjusting the Pre-Separation Roller Tension. .  page 103
Removing and Replacing the Feed Module . . .  page 105
Replacing the Feed Module Tires. . . . . . . . . . .  page 108

Summary of Contents for iNSIGHT 20








































































































































































Reviews:

No comments