Scantech MT-6320 User Manual Download

Page: 10 / 45

MT-6320 User Manual

- 7 -

Notification that one or more emails or short messages are received

Notification that one or more voice messages are received

There are multiple notification icons, which are beyond the scope of display. Click it to

display remaining icons.

Reminder that one calendar event will happen

Valid connection

Invalid connection

Synchronizing

Detected that Wi-Fi network is available

Using Wi-Fi

Connecting GPRS

GPRS available

Connecting EDGE

GPRS available

Using GPRS

Using EDGE

Missed call

Dialing when a SIM card is not inserted

Ongoing call

Call transferred

Call pending

Handsfree on

Antenna/signal icon: wireless call enabled/good signal

Antenna/signal icon: wireless call disabled

Antenna/signal icon: no service

Antenna/signal icon: searching service

SIM card not inserted

Roaming

2.3 Applications Window

Click

Start

. The applications window is displayed, where icons of applications are placed.

You can drag the icons of applications to sequence applications according to your habits.

Click the icon of an application to open the application.

Summary of Contents for MT-6320














































Search results

Summary of Contents for MT-6320

Reviews:

Related manuals for MT-6320

Brands by name

Popular brands

Scantech MT-6320, User Manual

Search results

Summary of Contents for MT-6320

Reviews:

Related manuals for MT-6320

Brands by name

Popular brands