47
Troubleshooting
PDF couldn't be opened
The PDF file may be damaged, or created with very untypical settings using third-
party software.
You cannot open a password protected PDF file
The PDF file may be protected by open and permissions passwords and by
limitations on how the PDF may be used. See
Protected PDF Files
.
Converted file has fewer pages than the original
Check the
Image-only Pages
options in the
Document Options
panel. If
Skip
is
selected, the PDF Converter will leave out the image-only pages from the output
file.
Converted file has some image-only pages
Check the
Image-only Pages
options in the
Document Options
panel. If the
Add
to Document as Image
option is selected, all the pages without a text layer in
the PDF file will be put as images in the converted file. Remember, in the
Preview
panel you can check whether the pages of a PDF file have a text layer or
are image-only pages.
shows that a text layer was detected for a page.
shows the image-only pages.
Converted file has incorrect character display
The PDF file may use non-standard character encoding for some or all of its text.
Enable the
Recognize non-standard encoded pages
option in the
Document
Options
panel or in the
Spreadsheet Options
panel. Check also the language
selection for recognizing non-standard encoded pages in the OCR Settings
dialog box. To do this click the Settings button in the
Document Options
or
Spreadsheet Options
panel.
Summary of Contents for PDF CONVERTER STANDARD 3 - GUIDE
Page 1: ...ScanSoft PDF Converter 3 Online Help...
Page 52: ...52...
