7
Parts Needed:
-
Raspberry Pi 3 Model B
-
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
-
2.54mm Pitch Single Row Male 90 Degree Right Angle Pin Header
-
Female to female jumper wire
Insert the motor screw terminals into motor HAT in the direction shown, then solder in place.
Next solder the large pin receptacle into the intended location.
Next, to maintain the correct spacing, slide the Female Jumper Wires onto the Pin Headers as shown,
before soldering the headers in place. Once the headers are soldered in place, remove the jumper wire.
Finally, install the motor HAT onto the Raspberry Pi 3 Model B
