Scanlab RTC 5 PC Interface Board, Installation And Operation Manual

Page: 39 / 622

RTC
®
5 PC Interface Board
Rev. 1.9 e
4 Layout and Interfaces
39
innovators for industry
4 Layout and Interfaces
4.1 Connectors and Jumper Positions
Figure 2 and figure 3 on page 40 show the positions
of the connectors and jumpers on the RTC
®
5’s front
and back side. All connectors and jumper settings are
described in detail in the following sections.
Legend
SCAN HEAD . . . . . . . . . . . . Primary scan head connector (D-SUB 9-pin female, pin-out see page 41 )
LASER. . . . . . . . . . . . . . . . . Laser connector and digital and analog output ports (D-SUB 15-pin female,
pin-out see page 46 )
MARKING ON THE FLY . . . . 16-pin socket connector with encoder inputs, (optionally) for Processing-on-
the-fly applications (pin-out see page 51 )
EXTENSION 1 . . . . . . . . . . . 40-pin socket connector with a 16-bit digital input and a 16-bit digital output
(pin-out see page 49 )
EXTENSION 2 . . . . . . . . . . . 26-pin socket connector with an 8-bit digital output port, e.g. for alternative
laser control (pin-out see page 50 )
SLAVE. . . . . . . . . . . . . . . . . 6-pin SLAVE connector (see "Master/Slave Synchronization", page 40 )
2. SCAN HEAD . . . . . . . . . . 10-pin socket connector for secondary scan head control (optionally acti-
vated, pin-out see page 41 )
STEPPER MOTOR . . . . . . . . 10-pin socket connector for stepper motor control (pin-out see page 53 )
RS232 . . . . . . . . . . . . . . . . 10-pin socket connector for controlling external devices via RS232 interface
(pin-out see page 51 )
SPI / I2C . . . . . . . . . . . . . . . 10-pin socket connector (serial extension interface, pin-out see page 52 )
ID . . . . . . . . . . . . . . . . . . . . ID number
PCI Connector . . . . . . . . . . Interface to PC (see
page 40 )
2
9
6
5
1
J11
1
J10
15
8
9
1 15
2 16
J6
1
2
39
40
J5 J4
2
25
26
1
J3
1
J7
10 2
9
1
J12
10 2
9
1
J9
10 2
9
1
J8
10 2
9
1
2. SCAN HEAD
STEPPER MOTOR
RS232
SPI / I2C
LASER
SCANHEAD
MARKING ON THE FLY
EXTENSION 1
EXTENSION 2
SLAVE
100 mm
160 mm
PCI Connector
ID
Layout of the RTC
®
5 (front side)